34  Peng Li, Feng Jin*, A Comparison Between the Epoxy-Bonded Layer Structure and Shear-Lag Model in a Thickness-Shear Mode Circular Cylindrical Piezoelectric Transformer, International Journal of Applied Electromagnetics and Mechanics, 2014, 46(3): 693-708.  Full Text   

33  Peng Li, Feng Jin*, Effect of an Imperfect Interface in a Quartz Crystal Microbalance for Detecting the Properties of an Additional Porous Layer, Journal of Applied Physics, 2014, 115(5): 054502.  Full Text , 赵桂平, 泡沫金属在冲击载荷下的动态压缩行为                

27  张钱诚, 郝方楠, 李裕春, 于渤, 刘剑锋, 金峰, 卢天健, 爆炸冲击载荷作用下车辆和人员的损伤及其防护, 力学与实践, 2014（封面文章） Full Text                 

26    L.L. Yan, B. Han, C.Q. Chen, Q.C. Zhang & T.J. Lu, Three-point bending of sandwich beams with aluminum foam-filled corrugated cores, Materials & Design, 2014.（IF=3.997，JCR 1区，中科院2区） Full Text                 

25    C.Y. Ni, F. Jin, T.J. Lu, Penetration resistance of hybrid-cored sandwich plates under oblique ballistic impact, Theoretical and Applied Mechanics Letters, 2014.    Full Text                 

24    X.R. Liu, X.G. Tian, T.J. Lu & B. Liang, Sandwich plates with functionally graded metallic foam cores subjected to air blast loading, International Journal of Mechanical Sciences, 2014 (invited contribution for Steve Reid’s 70thbirthday special edition).（IF=2.481，JCR 1区，中科院3区） Full Text                

23    B. Han, L.L. Yan, B. Yu, Q.C. Zhang, C.Q. Chen, T.J. Lu, Collapse mechanisms of metallic sandwich structures with aluminum foam-filled corrugated cores, Journal of Mechanics of Materials and Structures(JMMS), 2014.    Full Text                 

22    Q. Zhou, J. Zhao, J.Y. Xie, F. Wang, P. Huang, T.J. Lu, K.W. Xu, Grain size dependent strain rate sensitivity in nanocrystalline body-centered cubic metal thin films. Materials Science and Engineering: A, 2014.（IF=2.647，JCR 1区，中科院3区） Full Text                 

21    J. Zhao, F. Wang, P. Huang, T.J. Lu & K.W. Xu, Depth dependent strain rate sensitivity and inverse indentation size effect of hardness in body-centered cubic nanocrystalline metals, Materials Science and Engineering: A, 2014.（IF=2.647，JCR 1区，中科院3区） Full Text                 

20    袁振圣, 赵宏达, 陈振茂, 慈军, 卢天健, 耿丽, 胶结波纹夹芯板水浸超声相控阵检测, 应用力学学报, 2014    Full Text                 

19    X.L. Wang, D. Motola, T.J. Lu, S.J. Song & T. Kim, Heat transfer of a circular impinging jet on a circular cylinder in crossflow, International Journal of Thermal Sciences, 2014.（IF=2.769，JCR 1区，中科院2区） Full Text                 

18    X.L. Wang, H.B. Yan, T.J. Lu, S.J. Song & T. Kim, Heat transfer characteristics of an inclined impinging jet on a curved surface in crossflow, Journal of Heat Transfer, 2014.（IF=1.723，JCR 2区，中科院2区） Full Text                 

17    X.H. Yang, J.X.  Bai, J.J. Kuang, T.J. Lu, T. Kim, An analytical unit cell model for the effective thermal conductivity of high porosity open-cell metal foams, Transport in Porous Media, 2014.（IF=1.653，JCR 2区，中科院3区） Full Text                 

16    S.S. Feng, J.J. Kuang, J. Wang, T.J. Lu, An experimental and numerical study of finned metal foam heat sinks under impinging air jet cooling, International Journal of Heat and Mass Transfer, 2014.（IF=2.857，JCR 1区，中科院2区） Full Text                

15    X.H. Yang, J.X. Bai, H.B. Yan, T.J. Lu, T. Kim, Experimental investigation of chimney-enhanced natural convection in hexagonal honeycombs, Theoretical and Applied Mechanics Letters, 2014.    Full Text                 

14    X.H. Yang, T.J. Lu, T. Kim, An analytical model for permeability of isotropic porous media, Physics Letters A, 2014.（IF=1.677，JCR 2区，中科院3区） Full Text                 

13    X.L. Wang, J.H. Lee, S.J. Song, T.J. Lu, T. Kim, A comparative study of single-/two-jet crossflow heat transfer on a circular cylinder, International Journal of Heat and Mass, 2014.（IF=2.857，JCR 1区，中科院2区） Full Text                 

12    X.H. Yang, J.X. Bai, K-J. Kang, T.J. Lu, T. Kim, Experimental investigations of natural convection in wire-woven bulk Kagome, Transport in Porous Media, 2014.（IF=1.653，JCR 2区，中科院3区） Full Text                 

11    杨肖虎, 邝九杰, 白佳希, 卢天健, 金东范, 高孔隙率通孔金属泡沫有效导热系数的实验和理论研究, 西安交通大学学报, 2014    Full Text                 

10    杨肖虎, 白佳希, 卢天健, 通孔金属泡沫渗透率解析模型, 力学学报, 2014    Full Text                 

9    杨肖虎, 白佳希, 卢天健, 金东范, Kang Ki-Ju, 金属丝网编织Kagome自然对流实验研究, 西安交通大学学报, 2014    Full Text  

8    C. Shen, F.X. Xin, T.J. Lu, A 3-D elasticity theory based model for acoustic radiation from multilayered anisotropic plates, Journal of the Acoustical Society of America, 2014.（JCR 2区，中科院                

7    H. Meng, F.X. Xin, T.J. Lu, Sound absorption optimization of graded semi-open cellular metals by adopting the genetic algorithm method, Journal of Vibration and Acoustics, 2014.    Full Text                 

6    H. Meng, Q.B. Ao, H.P. Tang, F.X. Xin, T.J. Lu, Dynamic flow resistivity based model for sound absorption of multi-layer sintered fibrous metals, Science China Technological Sciences, 2014.    Full Text                 

5    孟晗, 卢天健, 辛锋先, 多孔纤维吸声材料填充蜂窝结构的声学性能, 中国科学E辑, 2014    Full Text                 

4    任树伟, 辛锋先, 卢天健, 考虑尺度效应的微平板声振耦合特性研究, 中国科学E辑, 2014    Full Text                 

3    辛锋先, 卢天健, 轻质板壳结构振动与声学耦合特性的理论及实验研究, 应用数学和力学, 2014    Full Text                 

2    宁景锋, 赵桂平, 穆林, 卢天健, 含有空气背衬层的分层多孔材料的吸声性能研究, 振动工程学报, 2014    Full Text                 

1    F.X. Xin, T.J. Lu, Effects of core topology on sound insulation performance of lightweight all-metallic sandwich panels, Materials and Manufacturing Process(special issue "Multi-functional Materials"), 2014.（IF=1.419，JCR 3区，中科院3区） Full Text