1. Zhou, Q., Li, J.J., Wang, F., Huang, P., Xu, K.W. & Lu, T.J., “Strain rate sensitivity of Cu/Ta multilayered films: Comparison between grain boundary and heterophase interface”, Scripta Mater. 111, 123-126, 2016.

2. Gu, C., Wang, F., Huang, P., Lu, T.J. & Xu, K.W., “Effects of Cu layers on the deformation behavior of CuTa/Cu multilayer thin films”, Mater. Sci. Eng. A649, 9-17, 2016.

3. Xue, F., Wang, F., Huang, P., Lu, T.J. & Xu, K.W., “Structural inhomogeneity and strain rate dependent indentation size effect in Zr-based metallic galss”, Mater. Sci. Eng. A655, 373-378, 2016.

4. Cui, Y., Huang, P., Torrents Abad, O., Wang, F., Lu, T.J., Xu, K.W. & Wang J,“Plastic deformation modes of CuZr/Cu multilayers”, Scientific Reports 6, 23306, 2016.

5. Gu, C., Wang, F., Huang, P., Lu, T.J. & Xu, K.W., “Structure-dependent size effects in CuTa/Cu nanolaminates”, Mater. Sci. Eng. A658, 381-388, 2016.

6. Zhou, Q., Wang, F., Huang, P., Lu, T.J. & Xu, K.W., “Length-scale-dependent deformation mechanism of CuX (X=Ru, W) multilayer thin films”, Mater. Sci. Eng. A664, 206-214, 2016.

7. Yang, X.H., Wang, W.B., Feng, S.S., Yang, C., Jin, L.W. & Lu, T.J., “Solidification of fluid saturated in open-cell metallic foams with graded morphologies”, Int. J. Heat Mass Transfer, 2016, in press.

8. Shi, M., Ji, X., Feng, S.S., Feng, S.S., Yang, Q.Z., Lu, T.J. & Xu, F., “Self-propelled hovercraft based on cold leidenfrost phenomenon”, Scientific Reports, 2016, in press.

9. Yang, X.H., Wang, W.B., Feng, S.S., Jin, L.W., Lu, T.J.,Chai, Y. & Zhang, Q.L., “Thermal analysis of cold storage: the role of porous metal foam”, Energy Proceedia, 2016, in press.

10. Xin, F.X & Lu, T.J., “Acoustomechanical constitutive theory of soft materials”, Acta Mech. Sinica, 2016, in press.

11. Xin, F.X & Lu, T.J., “Generalized method to analyze acoustomechanical stability of soft materials”, ASME J. Appl. Mech., 2016, in press.

12. Xin, F.X & Lu, T.J., “True method to analyze electromechanical stability of dielectric elastomers”, Europhys. Lett. (EPL), 2016, in press.

13. Chen, W.H., Chen, T.N., Xin, F.X, Wang, X.P., Du, X.W. & Lu, T.J., “Modeling of sound absorption based on the fractal microstructures of porous fibrous metals”, Mater. Design, 2016, in press.

14. Xin, F.X & Lu, T.J., “Acoustomechanical soft elastomers with interpenetrating networks”, Smart Mater. Struc., 2016, in press.

15. Xin, F.X & Lu, T.J., “Tensional acoustomechanical soft metamaterials”, Scientific Reports, 2016, in press.

16. 唐宇帆，任树伟，辛锋先，卢天健，“MEMS系统中微平板结构声振耦合性能研究”，《力学学报》，2016，已录用。

18. Zhou, Q., Li, J.J., Wang, F., Huang, P., Xu, K.W. & Lu, T.J., “Strain rate sensitivity of Cu/Ta multilayered films: Comparison between grain boundary and heterophase interface”, Scripta Mater. 111, 123-126, 2016.

19. Gu, C., Wang, F., Huang, P., Lu, T.J. & Xu, K.W., “Effects of Cu layers on the deformation behavior of CuTa/Cu multilayer thin films”, Mater. Sci. Eng. A649, 9-17, 2016.

20. Xue, F., Wang, F., Huang, P., Lu, T.J. & Xu, K.W., “Structural inhomogeneity and strain rate dependent indentation size effect in Zr-based metallic galss”, Mater. Sci. Eng. A655, 373-378, 2016.

21. Cui, Y., Huang, P., Torrents Abad, O., Wang, F., Lu, T.J., Xu, K.W. & Wang J,“Plastic deformation modes of CuZr/Cu multilayers”, Scientific Reports 6, 23306, 2016.

22. Gu, C., Wang, F., Huang, P., Lu, T.J. & Xu, K.W., “Structure-dependent size effects in CuTa/Cu nanolaminates”, Mater. Sci. Eng. A658, 381-388, 2016.

23. Zhou, Q., Wang, F., Huang, P., Lu, T.J. & Xu, K.W., “Length-scale-dependent deformation mechanism of CuX (X=Ru, W) multilayer thin films”, Mater. Sci. Eng. A664, 206-214, 2016.

24. Zhou, Q., Wang, F., Huang, P., Lu, T.J. & Xu, K.W., Corrigendum to “Length-scale-dependent deformation mechanism of CuX (X=Ru, W) multilayer thin films”, Mater. Sci. Eng. A, 2016, in press.

25. Chen, Z.Q., Wang, F., Huang, P., Xu, K.W. & Lu, T.J., “Bright bands in confined metallic glasses: localized percolation of flow units captured via transmission electron microscope”, Scientific Reports, 2016, in press.

26. Chen, Z., L. Huang, F. Wang, P. Huang, T. Lu and K. Xu. "Suppression of annealing-induced embrittlement in bulk metallic glass by surface crystalline coating." Materials & Design 109: 179-185. 2016.

26. Chen, Z., L. Huang, F. Wang, P. Huang, T. Lu and K. Xu. "Suppression of annealing-induced embrittlement in bulk metallic glass by surface crystalline coating." Materials & Design 109: 179-185. 2016.

27. Cui, X., J. Hu, J. R. Choi, Y. Huang, X. Wang, T. J. Lu and F. Xu. "A volumetric meter chip for point-of-care quantitative detection of bovine catalase for food safety control." Analytica Chimica Acta 935: 207-212. 2016.

28. Han, B., F. Li, C. Ni, Q. Zhang, C. Chen and T. Lu. "Stability and initial post-buckling of a standing sandwich beam under terminal force and self-weight." Archive of Applied Mechanics 86(6): 1063-1082. 2016.

29. Hu, J., X. Cui, Y. Gong, X. Xu, B. Gao, T. Wen, T. J. Lu and F. Xu. "Portable microfluidic and smartphone-based devices for monitoring of cardiovascular diseases at the point of care." Biotechnology advances 34(3):305320. 2016.

30. Huang, G., L. Tian, K.-K. Liu, B. Hu, F. Xu, T. J. Lu, R. R. Naik and S. Singamaneni. "Elastoplastic Deformation of Silk Micro and Nanostructures." ACS Biomaterials Science & Engineering. 2016.

31. Li, M., Q. Yang, H. Liu, M. Qiu, T. J. Lu and F. Xu. "Capillary Origami Inspired Fabrication of Complex 3D Hydrogel Constructs." Small. 2016.

32. Meng, H., S. Ren, F. Xin and T. Lu. "Sound absorption coefficient optimization of gradient sintered metal fiber felts." Science China Technological Sciences 59(5): 699-708. 2016.

33. Meng, H., X. Yang, S. Ren, F. Xin and T. Lu. "Sound propagation in composite micro-tubes with surface-mounted fibrous roughness elements." Composites Science and Technology 127: 158-168. 2016.

34. Shen, C., F. Xin and T. Lu. "Sound transmission across composite laminate sandwiches: Influence of orthogonal stiffeners and laminate layup." Composite Structures 143: 310-316. 2016.

35. Wang, L., Y. Li, G. Huang, X. Zhang, B. Pingguan-Murphy, B. Gao, T. J. Lu and F. Xu. "Hydrogel-based methods for engineering cellular microenvironment with spatiotemporal gradients." Critical reviews in biotechnology 36(3): 553-565. 2016.

36. Yan, H., Q. Zhang and T. Lu. "Heat transfer enhancement by X-type lattice in ventilated brake disc." International Journal of Thermal Sciences 107: 39-55. 2016.

37. Chen, Z.Q., Wang, F., Huang, P., Xu, K.W. & Lu, T.J., “β relaxation related bright bands in thin film metallic glasses: localized percolation of flow units captured via transmission electron microscope”, Appl. Phys. Lett., 2016, in press.

38. Han, B., Zhang, Q.C. & Lu, T.J., "Recent advances in hybrid lattice-cored sandwiches for enhanced multifunctional performance," Extreme Mech. Lett., 2016, in press.

39. Han, B., Qin, K.K., Zhang, Q.C., Xin, F.X., Zhang, Q. & Lu, T.J., "Free vibration and buckling of foam-filled corrugated composite sandwich plates under thermal loading," Comp. Struc., 2016, in press.

40. Xin, F.X & Lu, T.J., “A plane strain elasticity model for the acoustical properties of rib-stiffened composite plates”, European Journal of Mechanics A Solids, 2016, in press.